small_img-products-01.webp

thumbnail_img-products-01.webp

img-products-01.webp

Street + City

Cabinet controllers

small_img-products-02.webp

thumbnail_img-products-02.webp

img-products-02.webp

Luminaire controllers

small_img-products-03.webp

thumbnail_img-products-03.webp

img-products-03.webp

Solar controllers

small_img-products-04.webp

thumbnail_img-products-04.webp

img-products-04.webp

Gateway

small_img-products-05.webp

thumbnail_img-products-05.webp

img-products-05.webp

Sensors

small_img-products-06.webp

thumbnail_img-products-06.webp

img-products-06.webp

Optional Modules

large_PowerTrack Module.png

medium_PowerTrack Module.png

small_PowerTrack Module.png

thumbnail_PowerTrack Module.png

PowerTrack Module.png

The DITRA PowerTrack Module is designed for installation at line integrity monitoring points and provides real-time monitoring of cable lines when the standard operating voltage is absent.The device communicates with the DITRA PowerTrack controller installed in the power cabinet, operating at a DC voltage of 24-48 V. When standard operating voltage for luminaires (100-270 V AC) is applied, the PowerTrack Module switches to a protection mode, safeguarding its internal circuits against overvoltage.

large_PowerTrack Module.webp

medium_PowerTrack Module.webp

small_PowerTrack Module.webp

thumbnail_PowerTrack Module.webp

PowerTrack Module.webp

DITRA PowerTrack Module

Luminaire Monitoring Module for Real-Time Power Line Integrity Control

Mechanical

Power & Electrical

Environment

Inputs / Outputs

Configuration / Indication

Package Contents

large_Zhaga Node Connection.png

medium_Zhaga Node Connection.png

small_Zhaga Node Connection.png

thumbnail_Zhaga Node Connection.png

Zhaga-type Node Connection.png

large_Zhaga Node.png

medium_Zhaga Node.png

small_Zhaga Node.png

thumbnail_Zhaga Node.png

Zhaga-type Node.png

The GSM Node (Zhaga-type connector) is a wireless 2G/4G/NB-IoT street light controller designed for individual luminaire control, diagnostics, and dimming.It supports DALI 2.0 interfaces for flexible luminaire management. Data communication between the device and the server is carried out via 2G/4G/NB-IoT cellular networks. The luminaire can be controlled using either a built-in light sensor or a third-party light sensor.Equipped with a built-in GPS receiver, the device enables geo-positioning, internal clock synchronization, and includes an accelerometer for monitoring vibration, acceleration, and tilt.The unit operates on 12-30 V DC power supply and is configured directly through DITRA software.Designed for direct mounting on luminaires, the GSM Node features a Zhaga-type connection and comes with an IP66 dust and water resistance rating, ensuring durability in outdoor environments.

large_Zhaga Node Dimensions.png

medium_Zhaga Node Dimensions.png

small_Zhaga Node Dimensions.png

thumbnail_Zhaga Node Dimensions.png

Zhaga-type Node Dimensions.png

large_Zhaga Node.webp

medium_Zhaga Node.webp

small_Zhaga Node.webp

thumbnail_Zhaga Node.webp

Zhaga-type Node.webp

large_Zhaga Node 2.webp

medium_Zhaga Node 2.webp

small_Zhaga Node 2.webp

thumbnail_Zhaga Node 2.webp

Zhaga-type Node 2.webp

large_Zhaga Bottom.webp

medium_Zhaga Bottom.webp

small_Zhaga Bottom.webp

thumbnail_Zhaga Bottom.webp

Zhaga-type Bottom.webp

GSM Node (Zhaga-type connector), 2G, DALI 2.0, GPS, acelerometer

GSM Node (Zhaga-type connector), 2G, DALI 2.0

GSM Node (Zhaga-type connector), 2G/4G, DALI 2.0, GPS, acelerometer, Region: E

GSM Node (Zhaga-type connector), 2G/4G, DALI 2.0, GPS, acelerometer, Region: A

GSM Node (Zhaga-type connector), 2G/4G, DALI 2.0, Region: E

GSM Node (Zhaga-type connector), 2G/4G, DALI 2.0, Region: A

GSM Node (Zhaga-type connector), NB-IoT, DALI 2.0, GPS, accelerometer

GSM Node (Zhaga-type connector), NB-IoT, DALI 2.0

2G/4G/NB-IoT Zhaga-type connection Street Light Luminaire Controller

Interfaces and Protocols

GSM Node (Zhaga-type connector)

Node (Zhaga-type connector) Connection.png

Node (Zhaga-type connector).png

The LiWAVE Node is a module designed for wireless control of luminaires via radio signals, offering individual control, diagnostics, and dimming capabilities.This individual control module is part of the LiWAVE wireless lighting management system (868/915 MHz) and connects through a Zhaga-type connector. It provides seamless wireless lighting control without requiring additional wiring. The device is designed for easy installation and can be mounted in various locations.The LiWAVE Node supports DALI 2.0 interfaces and individual load control (on/off). Depending on the version, it may also include a GPS receiver for geo-positioning and synchronization.Configuration and control are performed via an 800–950 MHz radio channel through LiWAVE Base Stations.The device is specifically designed for installation on lighting fixture housings ensuring compatibility and easy integration.

Node (Zhaga-type connector) Dimensions.png

large_Zhaga LiWave 1.webp

medium_Zhaga LiWave 1.webp

small_Zhaga LiWave 1.webp

thumbnail_Zhaga LiWave 1.webp

LiWave 1 (Zhaga-type connector).webp

large_Zhaga LiWave 2.webp

medium_Zhaga LiWave 2.webp

small_Zhaga LiWave 2.webp

thumbnail_Zhaga LiWave 2.webp

LiWave 2 (Zhaga-type connector).webp

large_Zhaga LiWave 3.webp

medium_Zhaga LiWave 3.webp

small_Zhaga LiWave 3.webp

thumbnail_Zhaga LiWave 3.webp

LiWave 3 (Zhaga-type connector).webp

LiWAVE Node (Zhaga-type connector), DALI 2.0, GPS, acelerometer, Region: E

LiWAVE Node (Zhaga-type connector), DALI 2.0, GPS, acelerometer, Region: A

LiWAVE Node (Zhaga-type connector), DALI 2.0, Region: E

LiWAVE Node (Zhaga-type connector), DALI 2.0, Region: A

LiWAVE Wireless (868/915 MHz) Street Light Luminaire Controller with Zhaga-type connector

LiWAVE Node (Zhaga-type connector)

large_SN wire.png

medium_SN wire.png

small_SN wire.png

thumbnail_SN wire.png

SN wire.png

large_Wire LiteLINE Node new.png

medium_Wire LiteLINE Node new.png

small_Wire LiteLINE Node new.png

thumbnail_Wire LiteLINE Node new.png

Wire LiteLINE Node new.png

The Wire LiteLINE Node is a wired PLC (Power Line Communication) control and dimming module designed for managing a single luminaire or a group of luminaires.It is fully compatible with third-party motion sensors.The Wire LiteLINE Node supports multiple interfaces, including DALI, DALI 2.0, PWM, 1-10V, and 0-10V, as well as independent load control (on/off).Operating on a voltage range of 110-230 V, the device supports luminaires with power ratings of up to 1000 W.Control is provided individually through the DITRA CORE PRO, PRO-2, or LIGHT Central Gateways or via DITRA LiteLINE over 110-230 V power lines. LiteLINE technology operates at a frequency of 132.5 kHz, in compliance with CENELEC EN 50065-1 (band-C) standards.The unit is designed for flexible installation inside a luminaire, within its housing, or inside a lighting pole using wired connections. It also features an IP68 rating for dust and moisture protection.

large_LiteLine Node .png

medium_LiteLine Node .png

small_LiteLine Node .png

thumbnail_LiteLine Node .png

LiteLine Node .png

large_Wire LiteLINE Node new.webp

medium_Wire LiteLINE Node new.webp

small_Wire LiteLINE Node new.webp

thumbnail_Wire LiteLINE Node new.webp

Wire LiteLINE Node new.webp

Pole-mounted outdoor streetlight luminaire controller with wired connection for Power Line Communication (PLC).

Wire LiteLINE Node

large_LiWAVE Node CS wire.png

medium_LiWAVE Node CS wire.png

small_LiWAVE Node CS wire.png

thumbnail_LiWAVE Node CS wire.png

LiWAVE Node CS wire.png

large_Wire LiWAVE Node new.png

medium_Wire LiWAVE Node new.png

small_Wire LiWAVE Node new.png

thumbnail_Wire LiWAVE Node new.png

Wire LiWAVE Node new.png

Wire LiWAVE Node is a module for wireless luminaire control via radio communication. It is designed for individual control, diagnostics, and dimming.This individual control module is part of the LiWAVE wireless lighting management system (868/915 MHz) and can be connected to the system through a wired interface. It supports individual control of lighting systems and operates on both 868 MHz and 915 MHz frequency bands. With the LiWAVE system, users can efficiently manage their lighting network wirelessly, eliminating the need for additional wiring. The device is designed for quick installation and can be mounted in various locations.The module supports DALI, DALI 2.0, PWM, 1-10V, and 0-10V interfaces, along with individual load control (on/off). Certain versions also come equipped with a GPS receiver for enhanced functionality.Wire LiWAVE Node is configured and controlled via an 800-950 MHz radio channel through DITRA Base Stations.The device is intended for installation inside a lighting fixture housing and connects via a wired interface.

large_LiWAVE Node Dimensions.png

medium_LiWAVE Node Dimensions.png

small_LiWAVE Node Dimensions.png

thumbnail_LiWAVE Node Dimensions.png

LiWAVE Node Dimensions.png

large_Wire LiWAVE Node new.webp

medium_Wire LiWAVE Node new.webp

small_Wire LiWAVE Node new.webp

thumbnail_Wire LiWAVE Node new.webp

Wire LiWAVE Node new.webp

LiWAVE wireless (868/915 MHz) street light luminaire controller with wired connection support

Wire LiWAVE Node

large_Wire Node Connection.png

medium_Wire Node Connection.png

small_Wire Node Connection.png

thumbnail_Wire Node Connection.png

Wire Node Connection.png

large_Wire Node 2.png

medium_Wire Node 2.png

small_Wire Node 2.png

thumbnail_Wire Node 2.png

Wire Node 2.png

Wire GSM Node is a wired street light controller that supports individual luminaire control, diagnostics, and dimming via wireless 2G/4G/NB-IoT cellular networks.It is compatible with multiple luminaire control interfaces, including DALI, DALI 2.0, PWM, 1-10V, and 0-10V. Data exchange between the device and the server is carried out through cellular networks, ensuring reliable communication.The unit features a built-in GPS receiver for geo-positioning, internal clock synchronization, and an accelerometer for detecting vibration, acceleration, and tilt. It can be controlled by an integrated light sensor or a third-party sensor.Powered by 110/220 V, the Wire GSM Node supports luminaires with power ratings up to 1000 W.Configuration is done directly through Ditra software.Designed for mounting directly on lighting poles or luminaires, the Wire GSM Node offers IP66-rated dust and water resistance, ensuring durability in outdoor environments. Installation is performed via wired connections.

large_Wire Node Dimensions.png

medium_Wire Node Dimensions.png

small_Wire Node Dimensions.png

thumbnail_Wire Node Dimensions.png

Wire Node Dimensions.png

large_Wire Node 2 (1).webp

medium_Wire Node 2 (1).webp

small_Wire Node 2 (1).webp

thumbnail_Wire Node 2 (1).webp

Wire Node 2 (1).webp

2G/4G/NB-IoT Street Light Luminaire Controller with Wired Connectivity

Wire GSM Node

medium_Nema LiteLINE Node Connection.png

small_Nema LiteLINE Node Connection.png

thumbnail_Nema LiteLINE Node Connection.png

Nema LiteLINE Node Connection.png

medium_Nema LiteLINE Node 2.png

small_Nema LiteLINE Node 2.png

thumbnail_Nema LiteLINE Node 2.png

Nema LiteLINE Node 2.png

NEMA LiteLINE Node is a module designed for individual control, diagnostics, and dimming of luminaires.NEMA LiteLINE Node functions as a PLC (Power Line Communication) control and dimming module, suitable for managing a single luminaire or a group of luminaires.NEMA LiteLINE Node is compatible with third-party motion sensors.It supports DALI, DALI 2.0, PWM, 1-10V, 0-10V interfaces, and offers individual load control (on/off).The unit operates on 110-230 V, supports luminaires with power ratings up to 1000 W.NEMA LiteLINE Node is managed individually through Central Gateway DITRA CORE PRO, PRO-2, LIGHT and Ditra LiteLINE via 110-230 V power lines. LiteLINE technology operates within the 132.5 kHz frequency range, complying with CENELEC EN 50065-1 (band-C).The device is designed for installation on luminaires using a NEMA socket and features an IP66 rating for dust and moisture protection.

Luminaire controllers / NEMA

LiWAVE Node (Zhaga-type connector)

NEMA LiteLINE Node

NEMA LiWAVE Node

NEMA GSM Node

NEMA LoRa Node