small_Arch controller category.webp

thumbnail_Arch controller category.webp

Arch controller category.webp

Architecture + Facade

Architectural Controllers

small_Media Facade category.webp

thumbnail_Media Facade category.webp

Media Facade category.webp

Media Facade Controllers

small_Converters category.png

thumbnail_Converters category.png

Converters category.png

Entertainment

Converters

small_Transceiver category.webp

thumbnail_Transceiver category.webp

Transceiver category.webp

Transcievers

small_Splitter category.webp

thumbnail_Splitter category.webp

Splitter category.webp

Splitters

small_Relay Switcher category.png

thumbnail_Relay Switcher category.png

Relay Switcher category.png

Relay Switches

small_LED driver category.png

thumbnail_LED driver category.png

LED driver category.png

DMX-PWM LED Controllers

small_img-products-05.webp

thumbnail_img-products-05.webp

img-products-05.webp

SPI LED Pixel Controllers

small_Dimmer category.png

thumbnail_Dimmer category.png

Dimmer category.png

Dimmers

small_Repeater category.png

thumbnail_Repeater category.png

Repeater category.png

Repeaters

large_ArtGATE Guard connection scheme.png

medium_ArtGATE Guard connection scheme.png

small_ArtGATE Guard connection scheme.png

thumbnail_ArtGATE Guard connection scheme.png

ArtGATE Guard connection scheme.png

large_ArtGate-Guard_dev1.png

medium_ArtGate-Guard_dev1.png

small_ArtGate-Guard_dev1.png

thumbnail_ArtGate-Guard_dev1.png

ArtGate-Guard_dev1.png

ArtGATE Guard operates as a bidirectional converter between Ethernet-based lighting networks (ArtNet, sACN) and DMX512 lighting control systems.It supports DMX512, ArtNet (1–4), sACN (Draft/Release), KiNet (v1/v2), and RTTrPL, enabling flexible combinations of signal transmission and reception across the network.The device can be powered redundantly — either via 100–315 V AC mains through a Neutrik PowerCON TRUE1 connector or via PoE (Power over Ethernet, IEEE 802.3af standard).Configuration is available through the built-in web interface or compatible third-party ArtNet software.&nbsp;ArtGATE Guard is designed for above-zero temperatures and suitable for both indoor and protected outdoor installations. Its vandal-resistant duralumin IP54-rated housing allows bracket, vertical, or horizontal mounting.

large_ArtGATE Guard dimensions.png

medium_ArtGATE Guard dimensions.png

small_ArtGATE Guard dimensions.png

thumbnail_ArtGATE Guard dimensions.png

ArtGATE Guard dimensions.png

large_ArtGate-Guard_dev1.webp

medium_ArtGate-Guard_dev1.webp

small_ArtGate-Guard_dev1.webp

thumbnail_ArtGate-Guard_dev1.webp

ArtGate-Guard_dev1.webp

large_ArtGate-Guard_dev.webp

medium_ArtGate-Guard_dev.webp

small_ArtGate-Guard_dev.webp

thumbnail_ArtGate-Guard_dev.webp

ArtGate-Guard_dev.webp

large_ArtGate-Guard_dev2.webp

medium_ArtGate-Guard_dev2.webp

small_ArtGate-Guard_dev2.webp

thumbnail_ArtGate-Guard_dev2.webp

ArtGate-Guard_dev2.webp

Guard series has been specifically designed for adverse environments, hardly accessible and excessively dusty indoor locations. Guard series converters have proved their excellent resistance to mechanical impact and any kind of stage smoke. These series include wireless DMX or ArtNet/sACN/RDM transceivers/receivers, bidirectional DMX to ArtNet/sACN converters, as well as hybrid CrossGates (wireless DMX/ArtNet/sACN transmitter/receivers). Natural heat convection and moulded 3mm space effective thick metal case with reinforced connectors provide high ingress protection (IP44). All ports are bidirectional i.e. may be configured as inputs or outputs. All DMX ports are galvanically isolated. UltraStart Technology guarantees ready device in less than 3 seconds after power supply. Different wall and clamp mounting options. Some devices feature PoE power supply (802.15f).

Guard

Bidirectional DMX/Ethernet converter with four optically isolated DMX ports, integrated 2-port Ethernet switch, PoE support, and full RDM functionality 

Mechanical

Power & Electrical

Environment

Control / Data Connections

Inputs / Outputs

Configuration / Indication

Package Contents

ArtGATE Guard

large_DaliGATE Rail connection scheme.png

medium_DaliGATE Rail connection scheme.png

small_DaliGATE Rail connection scheme.png

thumbnail_DaliGATE Rail connection scheme.png

DaliGATE Rail connection scheme.png

large_DaliGate-Rail_dev.png

medium_DaliGate-Rail_dev.png

small_DaliGate-Rail_dev.png

thumbnail_DaliGate-Rail_dev.png

DaliGate-Rail_dev.png

DALIGate Rail is a smart DIN-rail converter that connects DALI lighting systems with DMX512, Ethernet, and other modern control protocols. Designed for maximum compatibility, it supports DMX512, RDM (ANSI E1.20), ArtNet (1–4), sACN, KiNet (v1, v2), and RTTrPL, making it easy to include DALI fixtures in mixed-protocol environments.This compact device runs on 100–250V AC and can withstand voltage surges up to 305V. With its built-in 10/100 Mbps Ethernet port, DALIGate Rail enables easy network setup and remote management. It supports three conversion modes: DMX slot to DALI port, DMX slot to DALI slots, and DMX slot to DALI groups — giving you flexibility for different installation needs.Configuration is simple through an intuitive web interface, or using software that supports ArtNet, or dedicated DITRA tools. The device can also manage DALI lines and connected luminaires directly through its interface.DALIGate Rail is housed in a compact aluminum enclosure with laser engraving and no ventilation holes, ensuring silent operation and protection from dust. It fits into standard DIN rails and is ideal for both indoor and covered outdoor installations.

large_DaliGATE Rail dimensions.png

medium_DaliGATE Rail dimensions.png

small_DaliGATE Rail dimensions.png

thumbnail_DaliGATE Rail dimensions.png

DaliGATE Rail dimensions.png

large_DaliGate-Rail_dev.webp

medium_DaliGate-Rail_dev.webp

small_DaliGate-Rail_dev.webp

thumbnail_DaliGate-Rail_dev.webp

DaliGate-Rail_dev.webp

Lightweight and compact RAIL Series are the best choice for fixed cabinet based installations with DIN RAIL mounting available. All the advantages of standard converters, designed in RAIL cases. Space saving enclosures with resistant LaserText engraving. Natural heat convection. All DMX ports are bidirectional i.e. may be configured as inputs or outputs. All ports are galvanically isolated. UltraStart Technology guarantees ready device in less than 3 seconds after power supply. 15EDGV Terminal Blocks provide ultrafast dismount opportunities (UltraLock).

Rail

Ethernet/DMX-to-DALI converter for seamless integration of DALI fixtures into any DMX or IP-based lighting system

DALIGate Rail

large_ArtGATE Rail connection scheme.png

medium_ArtGATE Rail connection scheme.png

small_ArtGATE Rail connection scheme.png

thumbnail_ArtGATE Rail connection scheme.png

ArtGATE Rail connection scheme.png

large_ArtGate-Rail_dev.png

medium_ArtGate-Rail_dev.png

small_ArtGate-Rail_dev.png

thumbnail_ArtGate-Rail_dev.png

ArtGate-Rail_dev.png

ArtGATE Rail is a compact, DIN-rail mountable DMX/Ethernet node designed for integration into control cabinets and smart lighting systems. It functions as a bidirectional Art-Net/sACN to DMX converter, splitter, booster, and intelligent merger — ideal for fixed installations where space, reliability, and protocol flexibility are key.The unit features up to 8 DMX512 ports, each optically isolated and configurable as input or output. It supports full RDM (ANSI E1.20) functionality, ArtNet (I–IV), sACN, KiNet (v1, v2), and RTTrPL protocols for maximum compatibility with professional lighting networks.Dual RJ45 Ethernet ports enable daisy-chaining through the built-in 10/100 Mbps Ethernet switch, allowing for cascading multiple units without additional networking hardware. Power is supplied via PoE (IEEE 802.3af) or AC input (100–315 V), with robust surge protection for industrial-grade reliability.Trigger inputs allow activation of pre-programmed DMX scenes — such as lighting changes in response to fire alarms or building automation systems — even if the main console is offline. Static scenes can be stored in non-volatile memory, and the unit supports a wide range of merging modes including HTP, LTP, Auto, and Priority.Setup is performed through a built-in web interface, the ArtGate Manager utility, or any third-party software that supports ArtNet configuration. The housing is compact (12 DIN modules) and suitable for protected indoor environments or outdoor cabinets with environmental shielding.

large_ArtGATE Rail dimensions.png

medium_ArtGATE Rail dimensions.png

small_ArtGATE Rail dimensions.png

thumbnail_ArtGATE Rail dimensions.png

ArtGATE Rail dimensions.png

large_ArtGate-Rail_dev.webp

medium_ArtGate-Rail_dev.webp

small_ArtGate-Rail_dev.webp

thumbnail_ArtGate-Rail_dev.webp

ArtGate-Rail_dev.webp

DIN-rail Art-Net/sACN to DMX converter with up to 8 optically isolated DMX ports, dual Ethernet ports, PoE support, and trigger inputs for system automation and emergency scenarios

ArtGATE Rail

large_ArtGATE Connection Scheme .png

medium_ArtGATE Connection Scheme .png

small_ArtGATE Connection Scheme .png

thumbnail_ArtGATE Connection Scheme .png

ArtGATE Shield Connection Scheme .png

large_ArtGate-Shield_dev1.png

medium_ArtGate-Shield_dev1.png

small_ArtGate-Shield_dev1.png

thumbnail_ArtGate-Shield_dev1.png

ArtGate-Shield_dev1.png

ArtGATE Shield is a rugged, waterproof DMX/Ethernet node built for permanent or temporary outdoor installations. Designed to convert Ethernet lighting protocols to DMX512, it enables precise control of lighting fixtures across extended networks, even in challenging environmental conditions.Equipped with up to four optically isolated DMX ports, each port is fully configurable as input or output. ArtGATE Shield supports all major control protocols including ArtNet (I–IV), sACN, RDM (ANSI E1.20), KiNet (v1, v2), and RTTrPL, offering compatibility with nearly any modern lighting system.A built-in 2-port 10/100 Mbps Ethernet switch allows cascading and integration with other Ethernet-based devices. Power options include PoE (IEEE 802.3af) and AC input from 100 to 315 V, providing flexibility and redundancy in the field. All ports are galvanically isolated for maximum signal protection and system safety.ArtGATE Shield supports a wide range of merging modes (HTP, LTP, Auto, Priority), as well as triggering, static scene playback, and non-volatile memory storage. Configuration is quick and accessible via the built-in web interface, the ArtGate Manager utility, or any third-party software that supports ArtNet.Encased in a compact IP66-rated duralumin housing, the device is fully protected from dust, rain, and ambient contaminants, making it ideal for architectural lighting, outdoor installations, and semi-permanent show systems. It can be mounted on walls, trusses, poles, or enclosures, both horizontally and vertically.

large_ArtGATE Shield dimensions.png

medium_ArtGATE Shield dimensions.png

small_ArtGATE Shield dimensions.png

thumbnail_ArtGATE Shield dimensions.png

ArtGATE Shield dimensions.png

large_ArtGate-Shield_dev1.webp

medium_ArtGate-Shield_dev1.webp

small_ArtGate-Shield_dev1.webp

thumbnail_ArtGate-Shield_dev1.webp

ArtGate-Shield_dev1.webp

large_ArtGate-Shield_dev.webp

medium_ArtGate-Shield_dev.webp

small_ArtGate-Shield_dev.webp

thumbnail_ArtGate-Shield_dev.webp

ArtGate-Shield_dev.webp

Shield series are carefully crafted “offtrack” devices excellent for any outdoor installations under any weather conditions: from Arctic winters to Sahara’s hottest dusty summers, successfully tested for tropicalization to work in the most humid areas. Extensive installations are easily handled by our trademark devices with 2 Ethernet ports which obviate the need of using Ethernet switches.Natural heat convection and moulded 3mm space effective thick metal case with sealed connectors provide highest ingress protection (IP65). All DMX ports are bidirectional i.e. may be configured as inputs or outputs. All ports are galvanically isolated. UltraStart Technology guarantees ready device in less than 3 seconds after power supply. RDM support. Some devices feature PoE power supply (802.15f). Different wall and clamp mounting options.

Shield

Outdoor-ready Art-Net/sACN to DMX converter with up to 4 optically isolated DMX ports, dual Ethernet ports, PoE support, and IP66-rated housing

ArtGATE Shield

large_img-topbar-products.webp

medium_img-topbar-products.webp

small_img-topbar-products.webp

thumbnail_img-topbar-products.webp

img-topbar-products.webp

Explore our range of smart lighting control products — from controllers and communication modules to gateways and luminaire nodes. Designed for flexibility, reliability, and integration into modern Smart City systems, our solutions cover every scenario from individual to group control, wired or wireless

PROfessional lighting control hardware